Gas equipment provides comfort when cooking and is quite simple to operate. And the cost of energy is affordable. Where there is centralized gas supply, there are no difficulties with the supply of fuel. In small settlements, in country cooperatives, there are no central networks; the population uses cylinders to provide power to gas appliances.
The quality of the bottled gas is slightly different from that supplied centrally, and the owners of the stoves may notice that the burners are not working properly. Understanding why a gas stove smokes, it is worth considering that not all malfunctions can be eliminated independently. In most cases, the help of a qualified professional will be required.
In this article, we will talk about the main causes of soot and options for fixing the breakdown. Also note in which cases you should immediately contact a specialist.
The main causes of soot
The gas stove works normally if the flame in the burner is of natural blue color, without impurities of red and / or yellow hue. When multi-colored tongues appear in the flame, the gas is supplied unevenly, then this work cannot be called correct. A reddish shade of flame indicates that the fuel does not completely burn out or there is not enough air to burn gas.
The presence of red flames often precedes the appearance of soot.
The reason for this unpleasant phenomenon is:
- low gas quality;
- high / low pressure.
When the gas mixture contains too much mercaptan sulfur, thick, black smoke appears, particles of which settle on the dishes, the walls of the room.
Incorrect operation of burners, the presence of soot during the combustion process may indicate a low gas quality, low or high pressure in the system
A similar situation is noted when connecting the stove to a low-quality cylinder with a low gas content. In some cases, soot appears in the presence of malfunctions of the burner itself.
Consider the main reasons in more detail.
Reason # 1 - poor fuel quality
Understanding why there is soot from a working gas stove, it is important to know that the cylinders are filled with a gas mixture. When the composition contains a high sulfur content, soot appears.
If you are absolutely sure that poor fuel was the cause of the soot, you can file a complaint with Rospotrebnadzor and other organizations of a similar profile.
Together with the application you will need to provide:
- receipt issued during refueling;
- the tank itself (cylinder) with low-quality fuel for examination.
Often, such incidents are resolved peacefully in favor of gas consumers. You do not know what to do when a gas stove working from a cylinder smokes and what measures can be taken without delay?
Then remember a simple algorithm:
- try moving the bottle or gas stove to another location;
- if you have friends who use the services of the same organization that refills the cylinders, check if they have a gas stove;
- contact your fuel supplier to explain the increased sulfur content in the gas mixture;
- in the absence of contact with the organization that refills the cylinders, write a complaint with a request to restore justice, to compensate for the value of property damaged by soot.
When starting a trial with a fuel supplier, make sure that there is a problem in the quality of the gas. We also recommend that you familiarize yourself with the requirements for refueling cylinders and filling rates.
The actions of unscrupulous suppliers do not pose a threat to the health of users of bottled gas, but creates a lot of inconvenience during operation
In addition to problems with gas supplies, the reason for soot is often the need to adjust the equipment and eliminate malfunctions.
Reason # 2 - incorrect plate settings
Understanding why a household gas stove connected to a propane cylinder smokes, it is important to evaluate the pressure level in the system. It depends not only on the quality of the container, but also on the features of the burner. To deal with the problem, it is important to know the device last.
A burner consists of the following elements:
- Divider - Designed for uniform distribution of fuel along the entire perimeter of the burner. In appearance, the divider resembles a sleeve that is cut along the contour.
- Divider cover provides the desired diameter, looks like a round-shaped lid made of stainless steel, located on the top of the divider.
- Electric spark plug - an element of modern models of gas stoves. A spark is a signal to start work, gas is ignited from it. A candle is located on the side of the divider, a temperature sensor is located nearby, which ensures the safe operation of the stove. If the fire goes out, a command is sent to a special electromechanical device,
- Jet located under the divider, it looks like a small bolt having a through axial hole. The nozzle is responsible for uniform fuel supply, regulates the pressure.
The appearance of soot, the incorrect operation of the gas stove - all this is often associated with an installed nozzle, or rather, with a hole too large in it.
When disassembling a burner, pay attention to the nozzle. The hole in it should not exceed 1 mm, otherwise soot will form during gas combustion
Uneven fuel supply may be due to blockages. To clean the nozzle, carefully insert a thin wire into the hole, twist it between your fingers. Pressing, picking the nozzle is not recommended. This can lead to an increase in the hole, the appearance of soot.
If there is dirt, do not forget to clean the remaining parts as well, as soot can appear as a result of burning deposits accumulated on the burner surfaces. Rub all elements well with an old toothbrush soaked in detergent. Then rinse the parts under running water, dry well. Only then proceed with the assembly of the gas stove.
Reason # 3 - insufficient air volume
Insufficient amount of air that is supplied to the burner will cause soot even if all other elements are in good working order. To adjust the air disks, unscrew the locking screw and act very carefully.
Air discs are adjusted very carefully. At the end of operation, the flame should burn evenly, during operation of the burner there should be no extraneous sounds
Upon completion of the adjustment of the air disks, you must immediately check the quality of the gas stove.
When you turn on the burner, the gas must burn without extraneous sounds, buzzing. Tongues of flame should not be more than 2.5 cm in height. If the adjustment did not help, you should return the air disks to their original position.
When to replace the nozzle?
Modern gas stoves, for the most part, are designed for centralized gas supply. In the central networks methane is used, the pressure in the system differs from the pressure in the cylinder, therefore a hole in the nozzle of a slightly larger diameter is necessary.When using bottled gas, propane is used to provide domestic needs, therefore a nozzle with a smaller opening is needed.
In the basic configuration, nozzles designed to supply fuel through centralized lines are always used. The complete set of modern models may include a spare nozzle designed for bottled gas. Also, to use the cylinders, an additional gas reducer has to be replaced.
Trying to get rid of the cause of soot on the burner of a household gas stove, it is important to purchase a nozzle that matches the brand of the household appliance. Otherwise, replacing the part will not bring the expected result.
The correct selection of the nozzle, competent installation ensures uninterrupted operation of the gas stove. If there are mounting errors, the fuel will be supplied unevenly
In older models of gas stoves there is no nozzle. However, they are equipped with a mechanism to regulate the intensity of fuel intake. You need to configure it correctly. Adjustment is carried out by turning the tap, which is equipped with a gas cylinder. Without unscrewing the valve to the end, it is easy to reduce the gas pressure in the system, to minimize the likelihood of soot.
In some situations, soot appears when the oven is turned on. It is likely that nozzle replacement is also needed here. In most gas stoves, the nozzle is located behind the left wall of the oven chamber, into which the burner, curved by an arc, is inserted. To replace the nozzle, unscrew the screws, remove the burner, find and replace the part.
During prolonged use of a gas appliance, the nozzle could stick to the burner nozzle. In such a case, it is necessary to lubricate it with a special composition, wait a few minutes.
When the nozzle is deformed - the fuel enters the burner unevenly, soot and gas accumulation in the device are possible, which is dangerous. To replace the nozzle, you need to look at the brand of the gas stove, select the appropriate components.
It is important to remember that gas equipment is potentially dangerous, therefore, in case of any breakdowns, it is advisable to invite specialists from the gas company with which you have a service agreement.
The soot that appears when using a gas stove causes a lot of trouble. The reasons for this behavior of the burner may be different, however, most often, they are associated with an incorrect nozzle opening size. The video shows how to quickly replace the nozzle, to ensure the normal operation of the gas appliance:
When the gas stove smokes, it is necessary to start the diagnosis by checking that the nozzle matches the type of fuel. If everything is in order here, you should pay attention to the quality of the fuel. It is recommended to refill cylinders only in trusted organizations. In some cases, the appearance of soot is associated with the presence of a malfunction. To find a breakdown, correctly eliminate it, it is worth inviting a professional.
Have you recently resolved a burner problem that started to smoke? Tell us what your reason for the malfunction was and how you dealt with it. If you want to supplement the above material or ask questions about the topic of the article to our experts and other visitors to the site, write your comments in the feedback section below.