The air-water effect of a bath with a hydromassage can tone, relieve tension, relax, improve well-being, and various additives can affect the condition of the skin, improve blood circulation. But its installation is quite complicated, and the call of specialists will cost a pretty penny.
Agree, it's not bad to try to do everything on your own, saving on the call of highly qualified plumbers? Do you want to install a jacuzzi with your own hands, but have never done it? We will try to help you - the article discusses the installation of a bathtub with hydromassage indoors and the option of installing equipment on the street.
Also detailed are the subtleties of connecting to water and electricity, and to the sewer. Useful recommendations for the care and proper operation of such a bath are given. The material is supplemented with photo installation instructions and videos on the maintenance and installation of the mixer.
Classification of Jacuzzi Mods
The choice of design of such a bath directly depends on the size and shape of the room in which it will be located and operated. The main criteria for choosing a spa bath and useful tips for a potential buyer are discussed in detail in our other article.
It is not recommended to install a jacuzzi in residential apartments of multi-storey buildings and thus replace a conventional bathtub, since installation is accompanied by a number of difficulties, and the operation process has several nuances.
- A spa bath will require permission from housing authorities. According to the technical characteristics of the building, experts estimate the permissible floor load. Even the lightest construction with water will weigh about 800 kg, which can lead to a collapse of the floor.
- In some cases, to install a jacuzzi, you need to combine the bathroom and the bathroom into one. To carry out such a redevelopment, sometimes the permission of the above instances is required.
- The jacuzzi nozzles are sensitive to the iron content in the water, so it is important to install additional filters for hot and cold water.
- When taking water treatments in the hot tub, you can not use soap, shampoos, gels and any foaming substances. These tools lead to clogging of holes. Therefore, in addition to a jacuzzi, the apartment should have an ordinary bathtub for traditional bathing.
The jacuzzi bathtub fits perfectly into the country house. The structure can be placed both indoors, with a separate room for bathing, and on the terrace or near the house.
It is important to choose a special modification of the jacuzzi, designed for installation on the street.
Image Gallery
Photo from
Jacuzzi - an elite type of plumbing that allows you to combine the reception of hygiene procedures with a useful massage
Bathtubs with hydromassage effect are created as geothermal springs massaging bathing water jets.
The supply of water in the form of a pressure jet is provided by an electric pump that pumps water through a nozzle system
If there is a compressor in the technical equipment of the jacuzzi bath, its owners will be able to receive not only hydro, but also air massage, enhancing the tonic effect
The simplest models of a jacuzzi have 4 - 6 working nozzles located in places of acupressure. In bathtubs, more complex nozzles can be up to 16 and even up to 80 pcs. Install them in areas of influence on the spine, neck, feet, etc.
Expensive models are often equipped with devices for aromatherapy, interesting lighting, a system for disinfection
Almost all hot tubs are pleasing with an ergonomic configuration, comfortable handrails, armrests, devices for relaxing the shoulder girdle
The jacuzzi bathtubs are protected by automatic shutdown devices against voltage fluctuations during operation and from the “dry running” that disables the pump motor.
Specific features of the Jacuzzi
Artificial thermal spring at home
Technical equipment for hydromassage plumbing
Equipment for hydro and air massage
Standard and increased number of nozzles
Hot tubs with extra features
Safety devices
Protective systems for electric pump and compressor
Before buying a spa bath, you need to make a plan of the room in which it will be located.
The drawing should indicate the size of the room, as well as note the location of the water supply and electrical wiring. Depending on these parameters, a choice of bathtub and accessories is carried out.
Hot tubs are installed not only indoors, but also on the street. For these purposes, special models of a jacuzzi are selected, and the structures themselves are installed on a concrete foundation or precast plates
By the type of materials the jacuzzi bowls are:
- cast iron;
- acrylic;
- steel;
- stone.
For installation in the apartment, it is recommended to use hydromassage bathtubs made of light materials - steel or acrylic. Cast iron and stone modifications are mounted exclusively on a solid foundation, capable of supporting a weight of about a ton.
Enameled cast-iron and stone hot tubs tolerate chemical influences, physical activity, do not deform under heavy weight.
Their advantages are silent operation, low thermal conductivity, which allows for a long time to "keep" a temperature comfortable for receiving procedures.
The minimum dimensions of the jacuzzi are 1.2x1.2 m. This design fits perfectly into a small bathroom
Acrylic bathtubs are more in demand - they are lightweight, but durable, differ in a variety of shapes and colors. During operation, scratches may occur on the case, which can be removed by polishing.
According to the shape of the bowl, the jacuzzi is divided into:
- oval;
- round;
- rectangular;
- square;
- angular;
- non-standard.
Rectangular and corner models are ideal for a small room. Round and oval bathtubs look good in the center of the room, therefore, their installation will require significant space.
Square and non-standard shape models can be installed under the walls.
The asymmetric shape of the jacuzzi is a modern development of designers. This bathtub fits in small rooms and is distinguished by its spaciousness.
The Jacuzzi can support the following types of massage:
- water;
- air;
- water-air;
- ultrasonic;
- pulsating and sinusoidal.
Most modern jacuzzi models support water-air massage - when a stream consisting of water and air comes from the nozzles under pressure. Ultrasonic massage is not felt by the body, but enhances the healing effect of water procedures.
The intensity of the massage can be adjusted with a waterproof control panel. You can also manually set the modes.
Nozzles can be located in the back, lower back, hips, lower legs, on the sides. You can run them in turn or all at once. Advanced jacuzzi models have software that allows you to configure the force of influence, control the start time of a particular nozzle.
Additional features and elements of the jacuzzi:
- chromo and color therapy support;
- the presence of head restraints, steps, handles, sides and other auxiliary elements;
- the presence of an FM receiver, a panel for plasma;
- automatic disinfection;
- set of mixers.
When installing a jacuzzi, it is important to correctly connect the structural elements in order to be able to use all the built-in installation functions.
Design and principle of operation
To install a jacuzzi with your own hands, it is important to know the design features and the principles of hydromassage plumbing.
A typical set of technical equipment for a hot tub includes:
- compressor (intake);
- pump;
- electronic or pneumatic control systems;
- nozzles;
- branch pipe systems.
Using a pump, water enters the hydromassage system, enters the compressor, where water and air are mixed. The jet enters the nozzles, after which it is supplied under pressure to the bath.
The figure shows the location of the important elements of the jacuzzi - compressor, pump, nozzles, built-in display and control system
The type of massage depends on the type of nozzle. Sewer pipes are connected to the branch pipe system.
As additional elements in some models there are:
- drainage system providing uninterrupted water circulation;
- audio or video installation;
- built-in modules for chromo-, aroma- and ozonotetapia.
In the jacuzzi sets you can find several additional nozzles, which, if desired, are easy to install. In this case, you will need a more powerful pump, which should be purchased separately. For a large bath volume, a powerful pump is required.
The effectiveness of the jacuzzi is affected by the number and configuration of nozzles, as well as the features of the location of the hydromassage elements in the bath.
A detailed design of the hot tub and equipment types is covered in another article on our website.
Features of outdoor jacuzzi installation
Owners of private homes install hot tubs on the terrace or at some distance from the house. In certain countries, it is necessary to obtain a special permit for construction.
When choosing a mounting location, it is important to consider not only the dimensions of the structure, but also the dimensions of the site for entry and technical work. Also, the jacuzzi should be located no closer than 1.5 m from the house and the border of the site.
It should be noted that the distance from overhead power lines should be from 3 m, and from spa panels - from 1.5 m.
Site preparation for installation
The weight of a hot tub with water can reach tons, so it is important to build a reliable foundation for its installation in order to avoid damage to the device during its operation.
The minimum size of the platform for installing a jacuzzi on the street is 3x3 meters
Concrete monolithic base is considered the most durable and reliable, therefore, it is ideal for the installation of a spa bath. It is laid in a uniform layer from 7.62 to 10.16 cm. However, such a solution will not allow the jacuzzi to be transported to another place without obstacles.
Prefabricated slabs are today considered the best foundation option. They simplify not only the installation, but also the dismantling of the structure. It is important to choose the optimum strength of the panels.
If you want to install a jacuzzi on the terrace, it is important to find out if its foundation is able to support the weight of the spa bath.
Competent power supply
The cable to the jacuzzi can be held both above the ground and below it. Its diameter depends on the distance of the disconnector and the jacuzzi, as well as the current limit. It is necessary to use copper wire with nylon insulation.
In addition, it is necessary to install an RCD on 240V and 50 A or a circuit on 60 A for models with a multistage pump. It is obvious that the required voltage for the jacuzzi is greater than the standard 220V, so it is advisable to install a disconnector in the electrical control unit.
It is also important to select one circuit for connection. Connection to it of other devices is excluded.
In most models of outdoor jacuzzi, a water supply pipe is not needed - water is drawn from a hose, then it is heated in a bowl.
Thorough preparation for use
Before using the whirlpool, you must:
- disconnect electricity, make sure that the elements are installed and securely fastened;
- open the air valves;
- fill the bowl with water from a garden hose or using buckets;
- connect electricity, start the heating function;
- test all modes.
After checking the operation of the hot tub, you can safely use it for its intended purpose.
Around the bathtub installed on the street, you can plant beautiful flowers, shrubs, etc. If you show imagination, you can get an impressive result.
Indoor Jacuzzi
When installing a spa bath indoors, it is important to take care of the following points.
- The room must be completed all the finishing work of the walls, floor, ceiling.
- On pipes of hot and cold water in advance you need to put cleaning filters. If water is supplied from the well, then it is additionally necessary to install a mechanical cleaning filter.
- In the bathroom, it is allowed to use only built-in sockets with grounding, connected through an RCD and having a degree of protection 4. We examined the norms and rules for installing sockets in the bathroom here. If there are no sockets in the room, the connection to electricity is via a network cable through the entire room.
- It is important to provide a place for wiring sewers and electrical networks.
- First you need to make sure that the jacuzzi can be placed in the room without violating the design of the doorways, as well as decoration;
- The room must have a ventilation system.
Next, we consider the main stages of installation and connection of equipment.
Stage # 1 - Installation of the Jacuzzi
Before the installation process is completed, it is not recommended to remove the film to protect the coating of the bath. Also, when transporting the structure, it is forbidden to take on sticking nozzles, nozzles and other elements. It is permissible to hold the bathtub exclusively by the metal body.
Jacuzzi set strictly horizontally. Determine it will help the building level with a laser device or a conventional oil bulb. Adjustment occurs by tightening the height of the legs, so even on an uneven floor you can achieve a horizontal position of the body.
The next step is the installation of the frame and bracket. These elements support the bowl, without them it will bend. A large number of additional supports for the jacuzzi in the configuration indicates that the design is made of fragile materials.
The drain hole should be located no higher than 10 cm from the floor, otherwise it is necessary to purchase a stand for it.
When installing the housing, it is important to reliably assemble the frame structure and correctly install the bowl, checking that there are no distortions
Stage # 2 - connection to the water supply and sewerage
The water supply network should have a pressure of no more than 5 atmospheres. If there is any doubt that the system will be able to maintain this pressure, then an optional pressure reducer can be installed.
Water without impurities in domestic conditions is quite rare. Therefore, it is important to install coarse filters if water comes from a well, an open reservoir, a well, and fine cleaning.
Pipes should be located as close to the bathtub as possible. It is also important that they do not block access to the connection nodes.
The diagram shows the location of the elements of the jacuzzi as an example of angular modification. Water supply is carried out from below, cold, hot water and electricity - from the side
The drain for sewage should be with a hole diameter of 4-5 cm, located above the drain hole at a distance of no higher than 10 cm from the floor.
Connecting faucets and water supply is no different from the procedure for connecting to a conventional bath. The only feature is that it is not installed on the wall, but inside the bath.
Semi-automatic drain-overflow system.The valve opens with a handle located on the overflow hole.
The drain hole is connected using a flexible pipe for water. Choosing its length, you should consider the possible movement of the bath relative to the wall at a distance of 50 cm.
It is imperative that the joints be sealed using gaskets if necessary.
The sewer pipe should be located on the wall or on the floor, but not higher than 2 cm. The jacuzzi siphon is connected to the drain with a corrugated pipe.
Having fulfilled the requirements, you can safely proceed with the installation of the spa bath.
Image Gallery
Photo from
Jacuzzi bathtub is a complex hydraulic equipment, for the operation of which it is necessary to correctly connect the water supply, electrics, sewers
In the connection scheme of the spa bath there must be filters of both fine and coarse cleaning installed within the housing and on the water supply branches
To the nozzles of hydromassage plumbing, you must pre-connect the pipes that supply water through the devices
Water lines should be laid as close as possible to building structures, but so that they are not pinched and access to repair is provided.
If possible, it is advisable to choose the shortest routes for laying water pipes. At connection points, the types of gaskets recommended by the bath manufacturer must be used.
Alignment of the bowl can be carried out both before connecting communications, and after. It is recommended to place it strictly horizontally, but allow some bias towards the drain if it is not in the middle of the bowl
The discharge of the hydromassage plumbing equipment should be located at least 10 cm higher than the sewer pipe socket that receives it
To supply water with a pressure to the nozzles, a centrifugal pump and compressor are installed, if available in the circuit. A separate power line with grounding is required to connect the jacuzzi.
Features of installing a hot tub
Using filters in a schema
Jacuzzi nozzle connection system
Laying of communication lines
Optimum length and route of pipelines
Rules for installing a whirlpool bowl
Installation and connection of a jacuzzi drain
Installation of electrical equipment for massage plumbing
After the installation is completed, it is necessary to visually inspect the connections, make sure that there are no cracks, and the joints are firmly fixed.
Stage # 3 - connecting the hot tub to the mains
It is important to remember that water is a conductor of electricity, and bathrooms - rooms with high humidity.
To connect the jacuzzi to the network you will need:
- standard network with a voltage of 220V;
- three-core power cable (length calculated individually);
- circuit breaker;
- RCD
- Voltage regulator;
- grounding system;
- electric wires with a cross section of 3 mm or more.
Connecting electricity is a very important and crucial part of the work, because water is a current conductor, so it is necessary to approach the process, observing electrical safety rules, having knowledge, skills and experience. It is best to turn to specialists in this matter.
The location of 220V sockets in zone 1 is not allowed. In zone 2, the use of sockets with a moisture protection class of 4 is allowed, in zone 3 of class 1
For electrical work, the site must be completely de-energized.
The outlet must be located outside the bathroom, but if it is present in the room, it must be of a European standard and meet the requirements of electrical safety - it must be equipped with grounding, connected through a circuit breaker and a circuit breaker to the electrical panel.
A three-core cable is used for this purpose. Usually yellow and green colors mean grounding, blue means zero, and red, brown, white means phase.When connecting a cable with a jacuzzi wiring, grounding is connected to grounding, zero to zero, phase to phase.
A reliable waterproof socket should come with a cover and curtains
It is advisable to install a voltage stabilizer so that the structure does not fail during unstable operation of the network. We recommend that you familiarize yourself with the rating of the best voltage stabilizers for home, given in our other article. To do this, follow the link.
Stage # 4 - testing the connection and checking the modes
Nozzles can be adjusted as you wish, using the control panel or a special regulator responsible for the flow rate of the jet, its direction.
Before starting, they collect water in the jacuzzi. All nozzles must be under water. After that, the system is started, its operability is checked. Then the jacuzzi is first turned off, and only then the water is drained.
After checking the connection of all nodes to electricity, the legs of the bath are drilled to the floor, the joints between the walls are sealed with sealant.
Having securely fixed the legs, you can begin to install the screen. Or its manufacture, if, for example, you decide to use a mosaic, tile or mirror panels
After installation, the space under the bathroom is covered with decorative panels that come with the kit. Only a section 2-3 cm from the floor for ventilation is left open.
It is important not to seal the board with ceramic tiles, since if it is necessary to dismantle the bath, it will not be possible to transfer it without damaging the lining.
Features of the Jacuzzi
First, water is collected in the bowl, and only then is it launched. It is important that all nozzles are located in water, otherwise the pump may overheat, which will lead to its leakage or failure. After starting, the flow rate is usually adjusted, nozzle nozzles are adjusted.
If the jacuzzi is equipped with a backlight, then it cannot be turned on if the bathtub is not filled with water, otherwise the lamp may overheat and the body may become deformed. Water acts as a lamp cooler
When using the jacuzzi, it is allowed to use aromatic substances, essences that do not form foam. Permissible water temperature - up to +50 degrees.
It is important to remember that improper use of such a bath can lead to breakdowns. Some of them can be diagnosed and eliminated on their own. And how to do this - we examined in detail in this article.
Tips for scrubbing and repairing
It is unacceptable to clean the acrylic bath with abrasive substances, products containing chlorine, alkali, acid and other aggressive components. It is necessary to use gel-like cleaning chemicals, soft tissues and sponges.
Acetic or citric acid will cope with water deposits on the surface of the bath
You can get rid of hard-to-reach impurities in nozzles using the following method.
- Water is poured into the bowl to the top, the temperature of which is at least 20 degrees.
- 1-1.5 acetic (7%) or citric acid is added to the water.
- They start the pump for 10-20 seconds so that the water mixes with the composition.
- The solution is left for 12 hours, after which it is drained.
- Then the jacuzzi is filled with water, the pump is started to rinse the bath from the previous composition, then the water is drained.
The procedure must be carried out 1-2 times a year.
Fine scratches are cleaned with fine-grained emery paper, then paste is applied to polish the car.
To prevent the formation of rust, after each bath, dry the bath with a dry clean linen cloth.
If the jacuzzi does not have a built-in automatic disinfection system, then every month it must be carried out independently. To do this, use any disinfectants. To save water, it is allowed to use water after the hydromassage procedure.
To disinfect the jacuzzi, it is necessary to fill the bathtub with water so that its level covers the top row of nozzles.A certain amount of disinfectant solution is poured into the bath, based on the manufacturer's recommendations, then the pump is started for 1-2 minutes, wait 10-15 minutes, then the water is drained.
Next, you need to again draw water in order to clean the bowl of the remnants of the product.
We recommend that you also review the detailed whirlpool care instructions.
About how to clean the jacuzzi properly:
You can learn about the principles of installing the mixer on board the jacuzzi here:
The jacuzzi is a bathroom, equipped with an additional function - a hydromassage, thanks to which water procedures become healthy.
The main difficulty in installing a jacuzzi on your own is connecting electricity. It is recommended to entrust this type of work to professionals.
Did you install and connect a jacuzzi yourself? Tell us how difficult this task was for you. Did you have difficulty connecting the equipment to the power supply? Leave your comments under this article - your practical experience will be useful to many home masters.